How do I set up and pair my Zebra DS-3678 HD scanner to an iOS Device?

In this article, learn how to pair and configure your Zebra DS-3678 HD Bluetooth scanner for iOS

Applicable Subscription Levels:

QC MANAGER | STARTER | PRO | PRO+ | ENTERPRISE

Applicable Operating Systems:

iOS 13.x

Go to the App Store on your iOS Device
Turn on Your Scanner (Pull Trigger)
Download Zebra Scanner app
Open the App and Scan the Barcode
You should then receive the following pop up and Pair
In the Idencia App, At the top right will be a button that looks like a page. Tap on that and go to Settings.
In the Idencia app settings, tap on Zebra Scanner Connection Help
Scan the barcode and you should hear a beep. This is to help pair the DS3678 to the Idencia App
Go back to the Home Page and select Scan Tag and press the Connect button in the bottom right corner
The scanner will pair to the Idencia App and show that it has connected to the DS3678 in the bottom left corner

Open the DS3678 Product Reference Guide document
Section 5-22 (Page 126) – CONTINUOUS BARCODE READ - Enabling this setting will allow you to hold the trigger down and scan multiple tags (Useful when Multi-scanning). Disabling this setting forces you to pull the trigger to scan each tag.
Section 5-6 (Page 110) – BEEP AFTER GOOD DECODE – Beeps after a tag is scanned
Section 5-8 (Page 112) – BEEPER VOLUME – Adjusts beeper volume
Section 2-8 (Page 46) – AIMING DOT – Recommend using Auto Aim.
- Auto Aim will project the Aiming Dot when the device is lifted/moved
Section 5-13 (Page 117) - LOW POWER MODE: Recommend disabling Low Power Mode. If scanner is used throughout the day, but not often enough to keep it from going to sleep, the user will need to remember to wake the scanner up before scanning in the app. If the scanner is not awake when a scan is attempted, the app will auto-close and the user will need to log back in and reconnect the scanner. Disabling low power mode will prevent this.

Please read through Chapter 5 of the DS3678 Product Reference Guide as there are other settings that may be of interest.